M1 Milliohm Meter M1毫欧表

lyon2521

Operation 全自动操作信息存储 Fully automatic – stores 128 readings – RS-232 data port	Current 电流[size=12.0000pt] 100 milliamps DC
Range 测量范围 0.01 to 19999 milliohms	Voltage 电压范围 2.5 volts internally limited
Resolution 测量结果范围 0.00 to 19999 milliohms	Temperature 温度范围[size=12.0000pt] operating -20ºC to +40°C
Accuracy 准确率 <0.1% of readings	Qualifications 产品合格认证 ISO 9001 registered[size=12.0000pt] NIST accuracy certified[size=12.0000pt] UL913 flightline approved[size=12.0000pt] CE certified

The M1 Milliohm Meter® is a handheld ground support bonding and grounding meter. It is intended for measuring low electrical resistance where portability, safety, high precision and ease of use are demanded, such as in the aviation industry, and is used to ensure the regulated conformity of electrical bonding for structural and safety purposes.

M1 Milliohm 仪表®是手持式接地支架粘接和接地计。它用于测量需要便携性、安全性、高精度和易用性的低电阻，如在航空工业中，并用于确保电气粘合的规范一致性，用于结构和安全目的。

The  M1 Milliohm Meter®, was developed from input received from surveys of more than 1000 users in the aviation industry.

M1 Milliohm ®，是从航空业1000多个用户的调查所得意见中开发的

The instrument represents major innovation and advancement in modern industrial instrumentation design. It is fast, light and convenient to use. The readings on the face of the meter can be processed and stored with the hand holding the meter. Measurements are made by the four wire or Kelvin probe method.

该仪器代表了现代工业仪表设计的重大创新和进步。它速度快，重量轻，使用方便。仪表表面的读数可以用手握住仪表进行处理和存储。测量由四线或开尔文探头方法进行。

FEATURES性能

All measurements are displayed in milliohms. No conversions, no zeroing of the meter or any other compensation for cables, etc. are needed. The meter is totally automatic and self-ranging, always displaying the test measurements on the most appropriate scale that contains the reading, so there is never any need for the operator to change scales or ranges.

所有测量值均以毫欧姆为单位显示。无需转换、无需对仪表进行归零或对电缆进行任何其他补偿等。仪表是完全自动和自测距的，始终以包含读数的最合适的刻度显示测试测量值，因此操作员无需更改刻度或范围。

The meter will not display a reading unless proper electrical continuity criteria are met, so there is no possibility of erroneous readings. The meter gives accurate, stable values, without fluctuation.

除非满足适当的电气连续性标准，否则仪表不会显示读数，因此不存在错误读数的可能性。仪表提供准确、稳定的值，无波动。

A reading cannot be accidentally lost without the operator making the conscious choice by either taking another reading or turning the power off. The meter also has an internal memory capable of storing up to 128 readings, which can be recalled and/or downloaded at a later time.

如果不让操作员通过获取其他读数或关闭电源来做出有意识的选择，读数不会意外丢失。仪表还具有内部存储器，可存储多达 128 个读数，可在以后调用和/或下载。

The display has adjustable display brightness controls, so that the measurements can be easily read in a wide range of lighting conditions, from inside of dark enclosed areas to direct outdoor sunlight. A choice of green or red display is available.

显示屏具有可调节的显示屏亮度控制功能，因此，从黑暗封闭区域内部到室外阳光直射，各种照明条件下都可以轻松读取测量值。有绿色或红色显示屏可供选择。

The M1 Milliohm Meter® has been in industrial use, primarily in aviation, for over fifteen years. It has proven to be a very versatile and reliable test tool, with low maintenance.

M1 Milliohm m®已在工业中使用，主要是在航空领域，超过十五年。事实证明，它是一种用途广泛且可靠的测试工具，维护成本低

The low voltage and current output will not cause ignition of flammable gas, as certified by Underwriters Laboratories per UL 913 standard entitled “Intrinsically Safe Apparatus and Associated Apparatus for use in Class I, II, and III, Division I, Hazardous Locations.” The unit is approved for use in hazardous environments such as in and around aircraft, fuel installations, fuel cells, and gas systems.

低电压和电流输出不会导致易燃气体点火，根据 UL 913 标准，由保险商实验室认证，标题为"在 I、II 和 III 类，危险位置。该装置经批准用于飞机内和周围危险环境、燃油装置、燃料电池和气体系统。

It is a highly sophisticated laboratory grade instrument, designed specifically with the field user in mind. Recalibration is not generally needed. The unit comes pre-tested, calibrated and certified directly from the manufacturer. Re-testing and certification schedules will depend on customer regulatory requirements.

它是一款高度精密的实验室级仪器，专为现场用户而设计。通常不需要重新校准。该装置由制造商直接进行预测试、校准和认证。重新测试和认证计划将取决于客户的法规要求。

The M1 Milliohm Meter® uses a rechargeable 6″C” cell battery pack with special features that extend battery life for many years under normal working conditions and proper care.

M1 Milliohm M® 使用可充电的 6"C" 电池组，具有特殊功能，在正常工作条件下和适当护理下延长电池寿命多年

M1 Milliohm Meter Options:

· Standard M1-G Meter has Green Display with resolution of 0.01 milliohms

· Standard M1-R Meter has Red Display with resolution of 0.01 milliohms

· M1B Meter has Green Display only and greater maximum display resolution of 0.001 milliohms

M1 米洛米仪表选项：

•标准 M1-G 仪表具有绿色显示屏，分辨率为 0.01 毫欧

•标准 M1-R 仪表具有分辨率为 0.01 毫欧姆的红色显示屏

•M1B 仪表仅具有绿色显示，最大显示分辨率为 0.001 毫欧

The difference between standard M1-G/R and M1B Meter is in the display resolution only. If the additional resolution has not been specified or not required for your applications, the standard unit would likely be best choice.

标准 M1-G/R 和 M1B 仪表之间的差异仅在显示分辨率中。如果应用程序未指定或不需要其他分辨率，则标准单元可能是最佳选择。

M1 Milliohm Meter Kit includes:

· M1 Meter,

· Remote Probe

· Conditioning Charger (Global Power Adaptor with offshore shipments)

· User Manual

· 4 extra standard tips

· Waterproof Guard Case

· Certificate of Calibration with Test Data

M1 米洛姆仪表套件包括：

*M1 仪表，

•远程探头

•调节充电器（全球电源适配器，带离岸货件）

*用户手册

*4 个额外的标准提示

*防水防护箱

*测试数据校准证书

M1 Milliohm Meter used in:

· Aviation

· Aerospace

· Laboratory Testing

M1 米洛米用于：

*航空

*航空航天

*实验室测试

补充内容 (2019-12-6 09:57):
以上价格非真实价格，需要购买请来电确认报价